The warrantied helical pier system
Our round shaft helical piers are made of heavy-duty steel and have a high resistance against bending.
If you need help lifting your home or lighter structures like decks back to their original position, helical piers might be the answer you need. These systems are made of steel and include a set of helical blades on the lower section of the pier.
Helical piers are mechanically advanced into the soil using small construction or hand equipment. As they are installed to appropriate depths and capacities, they prevent any future settlement issues.
In many scenarios, these foundation piers will be able to lift your home back to a level position by the completion of the installation.
Our helical pier system is just what you need to stabilize your foundation. Call us for a free helical pier installation quote today! We serve Deltona, Oviedo, Orlando, and many nearby areas in Florida.
How foundation helical pier systems work
Foundations will experience settlement issues when the soils below the house prove unable to support the weight of the structure. Helical pier systems create a solid supporting base that transfers the weight of your home downwards to strong supporting soils.
How Helical Piers Work
First, soil is removed from the area where the helical pier will be installed. Helical pier sections are mechanically “screwed,” or advanced, into the soil.
Once proper depths and capacities are achieved, heavy duty steel foundation brackets are positioned below and against the foundation footing.
The weight of the home is then transferred through the helical piers to deep, competent soils. Lifting the home back towards its original position is attempted. Then, the soil around the foundation is carefully replaced.
Installing Helical Piers
The first section of the pier that is advanced into the ground has one or more helical blades (or “bearing plates”) welded to the shaft.
Additional helical pier sections do not have bearing plates and are instead used to extend the pier to the necessary installation depth.
Helical piers can be installed from either the exterior or interior of your home, providing an opportunity to lift your home back to its original position by the end of the installation time.
Helical piers can also be effective at closing cracks caused by settlement, and can also potentially improve the operation of doors and windows.
Installing our foundation helical pier system
The Helical Pier System permanently stabilizes settling, sinking structures. To install helical piers, our contractors will take these following four steps:
Preparing the foundation footing
For an outside installation, the soil around your foundation must be excavated to expose the footing at each pier location. For an inside installation, a section of your slab floor will need to be removed to expose the footing. The slab is restored after the installation.
A section of the footing will be cut away so that the steel bracket connected to the pier will support the wall directly. This approach will provide more effective support than lifting the section of the footing that extends beyond the walls.
Installing helical shafts
Next, steel helical piers are turned down into the soil until competent strata is reached. Extension shafts are added as necessary to reach greater depths.
These steel foundation piers are the strongest components in our foundation repair arsenal, and are responsible for transferring the weight of your structure to solid, load-bearing soil. Our foundation piers are available with a galvanized steel design. These piers are corrosion-resistant, for long-lasting durability.
Installing foundation brackets
Unlike push piers, helical piers are driven fully and completely before their brackets are attached.
This is mainly because helical piers don’t require the heavy weight of the structure to be driven into the soil. This makes them ideal for lighter structures, such as decks and concrete stairs.
Once all helical piers are installed, steel brackets are attached to connect each pier to the footing.
Lifting the foundation
Once all piers and brackets have been installed, the settlement of your foundation will be permanently halted.
At this time, we will determine whether or not it makes sense to lift your foundation back to its original position. This operation has the potential to close cracks in your foundation and return doors, locks, and windows to their original functionality.
When to use foundation helical piers
- Year-round installation
- Warrantied for 25 Years
- Galvanized steel design available
- Suitable for both heavy & light loads
- Does not rely on weight of structure for depth & capacity
- Round shaft has high resistance to bending
With knowledge of local soil conditions, helical piers can be an ideal solution because the installing contractor will know exactly how deep to install the piers to reach a stable soil layer that can support your home. If your goals are the following, helical piers are a good choice:
- You need the best opportunity to lift your home back to its original position.
- Lighter structures, such as decks or stoops, are in need of stabilization.
- You’d like minimal disturbance during installation.
- You’re looking for a fast, effective installation.
- Restoring your property value is a priority.
Your certified helical pier installers in Florida!
At Florida Foundation Authority, we’re proud of our permanent, warrantied solutions for foundation settlement of all types. Our team of in-house, certified contractors has repaired settling foundations throughout Florida, and we’re ready to help you.
If you would like a free foundation helical pier installation quote, call or e-mail us today!
We serve Oviedo, Orlando, Deltona, and all surrounding areas.